Crawford 610 Swingdock  

The Crawford 610 Swingdock is the standard solution in general industry applications and easy to operate. The dock-in process has to be exact because of the defined length of the swing lip.

The Crawford 610 Swingdock system meets the standard demands of most loading operation and complies fully with all rules and regulations of the European Standard EN 1398.

Efficiency
To enable a safe and efficient process for loading and unloading, the 610 Swingdock connects the building with the vehicle. The result is highest safety for the transfer of goods, avoiding injuries to the personal or damages to the equipment. It is a time saving solution securing shortest possible ways in and out of the warehouse. For the optimal working environment the 610 Swingdock is installed as a part of the complete loading bay consisting of a dock leveller, an overhead sectional door and a dock shelter.

Mode of operation
The operation of a Crawford 610 Swingdock with a steel or an aluminium lip is based on an electro hydraulic swinging mechanism which bridges the last centimetres between the building and the vehicle bed. When the dock leveller is raised, the lip swings out and then – when lowered – lays down safely on the lorry bed. After loading or unloading, the leveller is raised again by the push of a button and automatically returns to its parking position, i.e. to ramp level.
To enable the handling of vehicles with different widths, the swing lips are available in different configurations: square, shaped or with fold down segments. The lip of the Crawford 610 Swingdock is made of steel and represents a durable and impact resistant solution and stands for long life time.

612 Unidock
The Crawford 612 Unidock is a variable dock leveller adapter system and represents a cost-effective upgrade solution to replace obsolete dock levellers. Replacement time is short, and no building alterations are required. The application and mode of operation are as described for the 610 Swingdock and the Crawford 612 Unidock system meets the standard demands of most loading operation and complies fully with all rules and regulations of the European Standard EN 1398.

See the Product Datasheet for possible options and sizes. 

615 Swingdock
The Crawford 615 Swingdock is the right solution for the handling of goods which require a higher load capacity of up to 10 tonnes (100 kN). The application and mode of operation are as described for the 610 Swingdock and the Crawford 615 Swingdock system meets the standard demands of most loading operation and complies fully with all rules and regulations of the European Standard EN 1398.

See the Product Datasheet for possible options and sizes.