660 Curtain Shelter SME - The all-round solution
The Crawford 660 Curtain Shelter SME is the standard shelter which is suitable for all vehicle sizes and has a flexible design. Should a vehicle deviate from the dockin centre-line and hit the shelter frame, built-in springs allow the shelter to follow the movement without being damaged. Its flexibility and high wear and tear resistance, in combination with a high price-performance ratio, contribute to the fact that the vast majority of all European loading bays are equipped with this standard dock shelter.
| Nominal width |
3250, 3450 mm |
| Nominal heigth |
3200, 3400, 3600 mm |
| Top curtain length |
1000, 1200 mm |
| Side curtain width |
600, 700 mm |
|
Nominal depth |
600, 900 mm |
| Top curtain |
Standard, splitted in upper corner |
| Side curtain |
Standard, reinforced in lower corner |
662 Curtain Shelter SMP
The exclusive model for special applications
The Crawford 662 Curtain Shelter SMP has been developed for special applications. A number of vehicles, e.g. interchangeable open bodies, rise during the docking process. A standard dock shelter cannot cope with this situation. This model has a self-adjusting top section, which automatically adapts to different vehicle heights and vertical movements. The Crawford 662 Curtain Shelter SMP can also be used in a “Road Model” application, where no load ramp is available and the shelter must be extended to ground level. The inside, parallel retraction system distributes the pressure from the vehicle in such a way that optimal tightness is obtained and collision with the ground is avoided.
See the Product Datasheet for possible options and sizes.
663 Curtain Shelter SF
The built-in shelter for building aesthetics
The Crawford 663 Curtain Shelter SF is the right solutions for applications, where architects and operators require a nice looking, smooth building façade. In order to meet such demands, dock shelters can be installed in building extensions or directly into the building façade. High quality inside structure ensures long lifetime.
See the Product Datasheet for possible options and sizes.
High quality curtain material
Neither curtain sheet material thickness nor surface treatment has any major influence on shelter lifetime in a harsh loading environment. Instead, the material structure is of importance. Ability to adjust to vehicle contours and resist wear and tear rests with the way the sheet material is built up. All Crawford curtain shelters are made in double-layered polyester with high longitudinal and transverse tensile strength.
Useful options
- Rain channel: The unique rain channel is integrated in the middle of the roof part. Controlled water drainage. The water is led out left and right, not into loading area.
- Splitted top curtain: 4 slits with double overlapping layer of PVC curtain material in the main wear area. Flexible coverage of rear top corners of docked vehicle for best sealing. Less draught into the building.
- Reinforced rupper flap: Robust rubber flap placed left and right in lower corners behind the front curtain. Increased pressure on the docked vehicle body for best sealing. Improved stability for the complete dock shelter in windy area. Less draught into the building.
- Corner seals: Triangle cushion covered with PVC curtain material in lower corners of the dock shelter. Minimization of draught from below during loading and unloading.